 |
Cylindrical Tanks
The reinforcing materials include
glass fiber, synthetic fiber, carbon fiber and combinations of these. for
heat-insulated equipment, the finished products using an FRP outer cover and
polyurethane foam core can be supplied. For products with an inside diameter of
over 3500mm, a great deal of the fabrication is done at the site.
back
Processing Tanks
In the case lining work for their agitator shafts is usually ordered at the same
time. Tank are made by the FW process, HL process or a combination of the two.
back
|
|
 |
|
|
"
Welcome to Our Website "
Since established in 2000, PT. Teknoglass Duromer Internusa (TDI) shortened to
PT. TEKNOGLASS, is the manufacturer of FRP Company, which has produced for the
Industrial Anti-Corrosion Sector. The company's initial period means business in
the area of Fabrication, Installation and Maintenance works.
|
|
|
Why Reinforced
Plastic ?
Corrosion fumes, vapors, gases and
chemical solutions have plaqued industry for many years. In storage and
processing vessel, pipe line and ventilating systems, loses due to corrosion
runs day by day and will be more and extend.
Most corrosion research waste devoted
to the development of new metal alloys as well as protective treatments and
coating for steel.
Many proved quite effective and in solving
specific corrosion problems but were often costly and many left much to be
desired. The development in specialty plastics and reinforcing materials led to
a promising new corrosion resistant material of construction
REINFORCED PLASTIC.
After considerable research and application
experience, the use of reinforced plastic equals and exceeds such materials as
stone ware, stainless steel, rubber lined steel, coated steel, wood and tile in
a variety corrosive applications.
|
|
 |
 |
 |
 |
 |
 |
 |
 |
The Key :
For the lowest costs, long term solution to many industries corrosion
problems, considered FRP equipment fabricated with the right selective of
material and suitable the design for the purpose.
|
|
